BJB PRODUCT LISTING -
Foams
Flexible Polyurethane Foams
This selection of flexible foams range from 3.0 lb. to 8.0 lb. per cubic foot free-rise density.
| Product: |
Shore Hardness: |
Worktime: |
Demold Time: |
Shrinkage:
in./in. |
Viscosity:
cps |
Ratio:
pbw (pbv) |
| TC-265 A/B |
|
0.5 mins |
15-30 mins |
|
|
50/100 |
MSDS Sheets: TC-265 A.pdf TC-265 B.pdf
3.0 lb. density, water blown foam. Common uses are make-up appliances, puppets and prosthetic components. |
| |
| TC-275 A/B |
|
0.5 mins |
15-30 mins |
|
|
40/100 |
MSDS Sheets: TC-275 A.pdf TC-275 B.pdf
4.0 to 5.0 lb. density, water blown foam. Common uses are stop-motion picture models and cushion foam. |
| |
| TC-276 A/B |
|
0.25 mins |
15-30 mins |
|
|
80/100 |
MSDS Sheets: TC-276 A.pdf TC-276 B.pdf
5.0 lb. density, water blown foam with an integral skin. Common uses are bumpers, special effects props and seat cushions. |
| |
| TC-280 A/B |
|
0.25 mins |
30 mins |
|
|
50/100 |
MSDS Sheets: TC-280 A.pdf TC-280 B.pdf
8.0 lb. density. This foam utilizes an environmentally safe non-ozone depleting blowing agent. Common uses are bumpers, pads, seat cushions, or any part requiring a tough integral skin. |
| |
| TC-295 A/B FR |
|
0.5 mins |
15-30 min |
|
|
50/100 |
MSDS Sheets: TC-295 Part A.pdf TC-295 Part B.pdf
6.0 lb. medium density, water blown foam. This foam meets the U.S. Department of Transportation of Interior Materials FMVSS 302. Excellent for bumpers and crash pads, arm rests and seat cushions, movie props and special effects devices. |
| |
Rigid Polyurethane Foams
| Product: |
Shore Hardness: |
Worktime: |
Demold Time: |
Shrinkage:
in./in. |
Viscosity:
cps |
Ratio:
pbw (pbv) |
| TC-300 A/B |
|
0.5 mins |
15-18 mins |
|
|
100/100 |
MSDS Sheets: TC-300 A.pdf TC-300 B.pdf
This foam series has excellent high temperature resistance. Available in 2.5 lb., 6 lb., 10 lb., and 16 lb. densities. |
| |
| TC-312 A/B |
|
0.5 mins |
15-20 mins |
|
|
80/100 |
MSDS Sheets: TC-312 A.pdf TC-312 B.pdf
The TC-312 A/B is a rigid fire retardant polyurethane foam system that can be easily mixed with a high shear blade mixer or through foam dispensing units. Demold time is short, 15-20 minutes or less. Cured parts can be nailed, stapled, and painted or stained within a short time after demolding. |
| |
|
