BJB PRODUCT LISTING -
Misc Products
Anti-Foams
| Product: |
Shore Hardness: |
Worktime: |
Demold Time: |
Shrinkage:
in./in. |
Viscosity:
cps |
Ratio:
pbw (pbv) |
| AF-4 |
|
0 mins |
|
|
|
|
MSDS Sheets: AF-4 A.pdf
Aids in de-airing most polyurethanes. |
| |
| AF-7 |
|
0 mins |
|
|
|
|
MSDS Sheets: AF-7 A.pdf
An extremely effective air release agent for BJB’s WC-series. |
| |
Coatings
| Product: |
Shore Hardness: |
Worktime: |
Demold Time: |
Shrinkage:
in./in. |
Viscosity:
cps |
Ratio:
pbw (pbv) |
| SC-111 |
|
0 mins |
|
|
|
|
MSDS Sheets: SC-111-msds.pdf
SC-111 WATER-BASED IN-MOLD COATING. A single component water-based, aliphatic polyurethane coating designed to provide a tough, paintable or final finish surface for various flexible polyurethane foams and elastomers. |
| |
| SC-80 |
|
0 mins |
|
|
|
|
MSDS Sheets: SC-80 MSDS.pdf
A single component aliphatic polyurethane which fully reacts using water as its dispersing agent. Originally developed as a primer for painting flexible polyurethane materials, SC-80 is often used as a top-coat or as a product that will seal porous substrates. |
| |
| SC-89 Paint |
|
0 mins |
|
|
|
|
MSDS Sheets: SC-89 Paint.pdf
Can be used as a stretch coating for fabrics, latex, foam, rubber, and polyurethane elastomers such as SkinFlex. The SC-89 Series is a fully reacted, non-yellowing, elastomeric urethane coating which dries by solvent evaporation. |
| |
| SC-89 Thinner |
|
0 mins |
|
|
|
|
MSDS Sheets: 89 Thinner.pdf
Used for reducing SC-89 Paints. Incorporating the use of safer solvents, it can be also used as a part cleaner prior to painting. |
| |
| SC-92 |
|
0 mins |
|
|
|
|
MSDS Sheets: SC-92 Part A.pdf
A single component, aliphatic, water-based coating designed to provide a final finish or paintable surface for various flexible polyurethane foams, elastomers, and latex products. It can also be used as an in-mold coating for casting or brushing polyurethane products behind. |
| |
| TC-89 Primer |
|
0 mins |
|
|
|
|
MSDS Sheets: TC-89 A.pdf TC-89 B.pdf
This primer was developed to apply against cured urethane substrates for achieving good adhesion when applying another urethane product for painting or bonding applications. |
| |
Pigments
The 6800 Series of liquid pigment dispersions are designed to be compatible with all BJB polyurethanes, foams, and epoxy resin systems. Click here to view the 6800 series color chart or click here to view the data sheet.
Releases
| Product: |
Shore Hardness: |
Worktime: |
Demold Time: |
Shrinkage:
in./in. |
Viscosity:
cps |
Ratio:
pbw (pbv) |
| A324 Rapid Release |
|
0 mins |
|
|
|
|
MSDS Sheets: A324 Rapid Release.pdf
A release agent designed for releasing silicone RTV from silicone RTV. Useful for releasing some urethane and epoxy. Sold in an aerosol spray can. |
| |
| Challenge 90 |
|
0 mins |
|
|
|
|
MSDS Sheets: Challenge90 A.pdf
Our most popular liquid release for use in parting rigid and flexible foams. It is also used for elastomer surfaces that require painting. |
| |
| E236 Urethane Release |
|
0 mins |
|
|
|
|
MSDS Sheets: E236 Mold Release.pdf
A highly versatile silicone release agent sold in an aerosol spray can. |
| |
| E302 Rocket Release |
|
0 mins |
|
|
|
|
MSDS Sheets: E302 Rocket Release.pdf
A versatile non-silicone based release agent. Does not hinder paint adhesion when property cleaned from cast parts. Sold in an aerosol spray can. |
| |
| Meguiars #87 |
|
0 mins |
|
|
|
|
MSDS Sheets: Meguiars87.pdf
A blend of carnauba, synthetic waxes, and thermo resins to provide consistent performance in hi-temp molding. |
| |
| Release #76 |
|
mins |
|
|
|
|
MSDS Sheets: Release-76A.pdf
A non-silicone based release agent, in bulk form, designed to release a variety of polyurethane material systems from epoxy, polyester, rubber, aluminum and steel mold surfaces. |
| |
| Release #78 |
|
mins |
|
|
|
|
MSDS Sheets: Release-78A.pdf
A highly effective silicone release agent, in bulk form, designed to release polyurethane elastomers from epoxy, polyester, rubber, aluminum and steel molds. |
| |
| RF-5124 |
|
0 mins |
|
|
|
|
MSDS Sheets: RF-5124 A.pdf
A polyvinyl chloride material that forms a parting film which is not sensitive to moisture since it is solvent based. |
| |
| RF-5215 |
|
0 mins |
|
|
|
|
MSDS Sheets: RF-5215 A.pdf
A polyvinyl alcohol material that provides a water-soluble release film. RF-5215 develops a good parting film where moisture is not in evidence. |
| |
| TR-104 |
|
mins |
|
|
|
|
MSDS Sheets: TR-104 MSDS.pdf
A firm mold release paste wax based on high quality carnauba wax blended with other synthetic high temperature ingredients and petroleum distillates. |
| |
Safety Solvent
| Product: |
Shore Hardness: |
Worktime: |
Demold Time: |
Shrinkage:
in./in. |
Viscosity:
cps |
Ratio:
pbw (pbv) |
| SC-105 |
|
0 mins |
|
|
|
|
MSDS Sheets: SC-105 A.pdf
A flush solvent formulated to be used in meter mix dispense equipment for purging and cleaning feed lines, dispensing guns and mixing chambers. Features a higher flash point and much lower VOC content making it safer than standard safety solvents. |
| |
|
